Thermador CIT365KM Guide de l'utilisateur télécharger pdf (Page 10)

1.800.735.4328 | THERMADOR.COM 109

COOKTOPS — INDUCTION

COOKTOPS

30-INCH INDUCTION

CIT304KB / CIT304KM / CIT304KBB

INSTALLATION

INSTALLATION ABOVE WARMING DRAWER

Thermador Cooktops may also be installed above a

Thermador Warming Drawer to create a convenient

cooking center. Refer to the warming drawer section

for additional specications.

IMPORTANT

We strongly recommend the installation of a Thermador

Ventilation System with this induction cooktop.

Seal the surfaces of the cutout to make them heat

resistant. This prevents the surfaces from expanding

as a result of humidity.

Solid surface countertops often require special

installation. For example, heat reective tape or

rounded corners may be necessary. Contact the

countertop manufacturer for instructions specic

to your countertop.

WARNING

To reduce the risk of ignition of nearby combustible

materials, install the countertop with a minimum

distance of 2" (51 mm) from both side walls and the

back wall.

HEAT SHIELD

The heat shield will require an additional 1" clearance

below the cooktop. For safety reasons, the heat shield

must be properly installed. This prevents components

from overheating as a result of the recirculation of

hot air from the cooktop. The heat shield is the same

width as the cooktop. For shipping, it is screwed to the

burner box. Once installed, the heat shield will be able

to rotate freely, as shown in the illustration. Refer to the

instructions packed with product for installation details.

30-INCH COOKTOP AND CUTOUT DIMENSIONS

heat shield

NOTE: The work surface should be

horizontal and level. The stability of

the countertop should be conrmed

even after making the cutout.

1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Thermador CIT365KM Guide de l'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Réseaux électriques Thermador CIT365KM